Main feature
1、Three parents obtained:three stripper rollers device , main
driving system and filter chanber used for single-card
2、Stepless variabe drive of doffer controlled by an inverter(an
electronic frequency converter)
3、New type of three front stationary flats and three post ones
4、One set of carding segment installed under licker-in
5、New model and high quality metallic card clothing
6、Digital display unit and contactless sensor showing technical
parameters such as delivery speed , shift production ,
ect.......,And iseveral automatic stop motion device
|
|
7、Continuous suction of four
points of overcard and intermittent suction of system
Specifications
1、 Applications : processing cotton and man-made fibres or blends
in length of 22-76
2、 Sliver count(g/m):3.5-6.5
3 、Lap size(mm):max diameter 550 width 980
4、 Cotton layer weight by chute feed (g/m):450-1000 5、 Production
rate (kg/h):up to 40
6 、Total draft :67.5-120.5
7 、Licker-in speed(r/mm): 930 800
8 、Doffer speed(r/mm): 6-36
9 、Cylinder apeed(r/mm): 360 330
|
|
10 、No.Of revolving flats (working/total):
41/106
11 、Flats speed(mm/min): 72.128.218.310
12 、Carding segment under licker-in: 1 piece
Post stationary flat: 3 pieces
Front stationary flat: 3 pieces
13、 Can size (mm) diameter: 600
Height: 900 1100
14 、Suction system : The filter chamber of single-card is used
at four overcard suction points to extract
continuously (static pressure on air outlet is required to
be -49到-98pa).Air outlet: 1800m3/h
The undercard waste and fly and dust on the filter net of
chamber are extracted intermittently by suction
system of outside card(the air volume on air inlet of each
card is required to be 2000m3/h, static pressure
to be-1863pa).
The suction system of outside card is supplied by userself(if
required, we can specially design the suction
system for user and suddly it with card).
15 、Total installed power:7.17kw.
16 、Space requirement(length×width): 3523×2096mm
17 、Net weigth(kg):approx:4500 |
|
